Effect of Ultrasonic‐assisted Preparation Methods on Structure,Morphology and Optical Properties of Nanosized Cupric Oxide

Cupric oxide is a p‐type semiconductor with a narrow band‐gap which is suitable for catalysis, electrochemical cells, field emission devices and gas sensor applications. Despite considerable efforts devoted to the preparation of the nanosized CuO, there is a lack of information about ultrasonic‐assisted (US) preparation methods. Nanosized cupric oxide was successfully prepared through different ultrasonic‐assisted (US) preparation methods. Furthermore, the influence of preparation method on the structure, morphology and optical properties of nanosized CuO has been reported. XRD patterns were identical to the single‐phase pure CuO with a monoclinic structure. The enhancement of the crystallinity and crystallite size was observed for the sample prepared through the US thermal decomposition. The absorption band of CuO nanocrystals prepared through the US liquid hydrolysis shows a clear red shift of about 40 nm compared to those obtained with other preparation methods. Our results indicated that almost spherical CuO nanoparticles with an average size of 65 nm were prepared during the US thermal decomposition, while CuO rod‐like nanostructures with an average diameter of about 16 nm were obtained via the US liquid hydrolysis method. The band gap values of nanosized CuO samples were larger than the reported value for the bulk CuO. Synthesized CuO samples by US methods with adjustable and controllable properties make the applicability of cupric oxide even more versatile.     

Analysis of benzophenone and 4-methylbenzophenone in breakfast cereals using ultrasonic extraction in combination with gas chromatography-tandem mass spectrometry (GC-MS)

Benzophenone (BP) and 4-methylbenzophenone (4MBP) are photo-initiators that are generally used to cure ink on carton boards.In this contribution, a fast and reliable method for the determination of BP and 4MBP in breakfast cereals is described. The sample was extracted ultrasonically using a mixture of dichloromethane and acetonitrile (1:1), followed by a clean-up of the extract using solid phase extraction with a silica cartridge. Finally, the extract was analysed by GC-MSⁿ. Benzophenone-d₁₀ was used as internal standard. The presented method is validated in terms of linearity, recovery, repeatability and intra-laboratory reproducibility, specificity, limit of detection and limit of quantification. In conclusion, this method is able to detect both BP and 4MBP at very low concentrations (LOD = 2 μg kg⁻¹) in breakfast cereals.     

Laser welding of thin foil nickel-titanium shape memory alloy

In this study, two L27 Taguchi experiments were carried out to study the effect of fibre laser welding parameters and their interactions upon the weld bead aspect ratio of nickel-titanium thin foil. The optimum parameters to produce full penetrated weld with the largest aspect ratio and desirable microstructure were successfully obtained by the Taguchi experimental design. The corrosion property of the optimized NiTi weld in Hank’s solution at 37.5 °C was studied and compared with the as-received NiTi. To improve the corrosion properties of the weld, the effect of post-weld-heat-treatments ranging from 573 to 1173 K was investigated. The corrosion properties, surface morphology, microstructure and Ti/Ni ratio of the heat-treated NiTi weld were analysed. It was found that a post-weld heat treatment at 573 K for 1 h provided the best pitting corrosion resistance at the weld zone.     

Ultrasonic velocity of binary systems at elevated pressures

Various empirical theories of ultrasonic velocity have been applied to three binary liquid mixtures, under pressures up to 200 MPa and their validity have been tested. A pressure dependent study of ultrasonic velocities has been made at 303.15 K. The agreement between theory and experiment is found to be quite satisfactory.     

3D finite element simulation of explosive welding of three-layer plates

A 3D finite element model of the explosive welding process of three-layer plates with materials of steel-copper-copper is established. Based on the presented model, the bonding mechanism is simulated and analyzed, different detonation modes are also comparatively studied to indicate the driving force spread in few microseconds. The results show that the three layer plates bond together after many times of impact between the flyers and the base driven by detonation wave, which is damping rapidly at each impa...     

The influence of magnetic field swept rate on the ultrasonic propagation velocity of magnetorheological fluids

Structure of magnetorheological (MR) fluids depends on the strength of the magnetic field applied and on the mode of its application. The ultrasonic wave propagation velocity changes under the effect of an external magnetic field as a result of formation of clusters arranged along the direction of the field in the MR fluids. Therefore, we propose a qualitative analysis of these clustering structures by measuring properties of ultrasonic propagation. Since the MR fluids are opaque, the non-contact inspection using this ultrasonic technique can be very useful. In this study, we measured ultrasonic propagation velocity in MR fluid influenced by an external magnetic field for different swept rate precisely. With increasing magnetic field intensity, the changes of the ultrasonic wave velocity are more pronounced. Sedimentation effect takes place in certain time for different swept rate due to magnetic particle size and it follows linear relationship in log scale. Significant differences of the ultrasonic wave velocity are established between the case when the field is swept at a constant rate and the case when it is stepped up.     

Ultrasonic‐Assistance and Aging Time Effects on the Zeolitation Process of BZSM‐5 Zeolite

The isomorphic substitution of boron into ZSM‐5 zeolite under static hydrothermal condition was investigated. Evaluation of hydrothermal synthesis of BZSM‐5 was performed by treating the synthesis mixture by different aging processes, namely, ultrasonic, static, stirring, and microwave‐assisted aging prior to the conventional hydrothermal treatment. The synthetic processes with different techniques of aging prior to the onset of conventional hydrothermal crystallization were compared with a process without any prior aging. The obtained results showed that the ultrasonic and microwave assisted aging shortened the crystallization time and altered the crystal size and the morphology of the obtained products. The characteristics of the synthesized products were obtained by FT‐IR spectroscopic, XRD and SEM techniques.     

Microelectrochemical investigation on aluminium–steel friction welds

Aluminium–steel friction welds (AlMgSi0.5/C35 and AlMgSi0.5/X5CrNi18‐10) were electrochemically investigated in a NaAc/HAc buffer (pH 5.9) and 0.1 mol/l NaCl using the microcapillary technique. This technique allows a lateral resolution of electrochemical measurements. However, microscopic investigations and scanning electron microscopy/energy dispersive X‐ray SEM/EDX measurements show that the reaction zone (RZ) and the heat affected zone (HAZ) of the welds are smaller than the microcapillary diameter. This paper discusses the advantages and limitations of the microcapillary technique in view of friction welds. Nevertheless, the electrochemical experiments allow a clear detection of the changing active surface area and the correlation to the microstructure (intermetallics). The application of microcapillary measurements on samples which were exposed in marine climate for 2 years shows a good correlation between the local potential measurements and the local corrosion phenomena. Copyright © 2010 John Wiley & Sons, Ltd.     

Non-contact evaluation of the resonant frequency of a microstructure using ultrasonic wave

This paper presents a novel non-contact method for evaluating the resonant frequency of a microstructure, Firstly, the microstructure under test is excited by ultrasonic waves. This excitation method does not impose any undefined load on the specimen like the electrostatic excitation and also this is the first actual use of ultrasonic wave for exciting a microstructure in the literature. Secondly, the amplitudes of the microstructure are determined by image edge detection using a Mexican hat wavelet transform on the vibrating images of the microstructure. The vibrating images are captured by a CCD camera when the microstructure is vibrated by ultrasonic waves at a series of discrete high frequencies （〉30 kHz）. Upon processing the vibrating images, the amplitudes at various excitation frequencies are obtained and an amplitude-frequency spectrum is obtained from which the resonant frequency is subsequently evaluated. A micro silicon structure consisting of a perforated plate （192 × 192 μm） and two cantilever beams （76 × 43 μm） which is about 4 μm thickness is tested. Since laser interferometry is not required, thermal effects on a test object can be avoided. Hence, the setup is relatively simple. Results show that the proposed method is a simple and effective approach for evaluating the dynamic characteristics of microstructures.     

流产后宫内胎物组织残留的超声诊断

回顾性分析了４６例临床被证实为宫内胎物组织残留的病例。结果表明，流产后较长时间有不规则阴道流血，而作Ｂ超检查能发现特征性改变。声像图显示，子宫增大，宫内有异常光团和不规则液性暗区或宫腔局部膨隆，周边见很亮光条。认为诊断宫内残留组织，可以结合病只与声像技术较易诊断出来。本组超声诊断符合率达９８％。对减少因宫内残留造成的子宫收缩不良、不规则阴道流血等现象，避免并发感染及导致绒癌发生等不良后果，有重要的